2019+ Acura RDX 2.0T Intercooler Upgrade
EXPECTED 11/29/2022
PLEASE ALLOW AN ADDITIONAL TWO WEEKS FOR POWDERCOATED INTERCOOLERS TO BE PROCESSED AND SHIPPED.
Designed specifically for the 3rd Gen Acura RDX chassis!
Fits 2019-2020 Acura RDX 2.0T
Fits 2021+ RDX 2.0T with Minor Modification
REQUIRES INTERCOOLER INSTALL KIT
Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.
Overview
Important Notes:
- NO ECU CALIBRATION REQUIRED
- Intercooler Torque Spec: 18 ft/lb
Technical Notes:
It�s no secret that Honda�s newer turbo platforms are extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs. The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 25.5 x 3.0 x 9.75" 550+ horsepower rated bar-and-plate core. Our intercooler core which increases internal flow by 83% to allow optimal cooling and airflow. This intercooler utilizes factory mounting spots with cast aluminum end tanks as well as all factory air ducts/shrouds. To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install.
Performance Gains:
- Mid-range & top-end power gains
- Major drop in post charge air temperature at peak
- Increased efficiency & consistency in power delivery
- Increased engine safety
Kit Includes:
- (1) Intercooler Assembly
- (1) Cardboard Stencil w/ �PRL� Logo
- (1) Buna O-Ring
- (1) 304 Stainless Worm Clamp
EXPECTED 11/29/2022
PLEASE ALLOW AN ADDITIONAL TWO WEEKS FOR POWDERCOATED INTERCOOLERS TO BE PROCESSED AND SHIPPED.
Designed specifically for the 3rd Gen Acura RDX chassis!
Fits 2019-2020 Acura RDX 2.0T
Fits 2021+ RDX 2.0T with Minor Modification
REQUIRES INTERCOOLER INSTALL KIT
Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.
Overview
Important Notes:
- NO ECU CALIBRATION REQUIRED
- Intercooler Torque Spec: 18 ft/lb
Technical Notes:
It�s no secret that Honda�s newer turbo platforms are extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs. The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 25.5 x 3.0 x 9.75" 550+ horsepower rated bar-and-plate core. Our intercooler core which increases internal flow by 83% to allow optimal cooling and airflow. This intercooler utilizes factory mounting spots with cast aluminum end tanks as well as all factory air ducts/shrouds. To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install.
Performance Gains:
- Mid-range & top-end power gains
- Major drop in post charge air temperature at peak
- Increased efficiency & consistency in power delivery
- Increased engine safety
Kit Includes:
- (1) Intercooler Assembly
- (1) Cardboard Stencil w/ �PRL� Logo
- (1) Buna O-Ring
- (1) 304 Stainless Worm Clamp
EXPECTED 11/29/2022
PLEASE ALLOW AN ADDITIONAL TWO WEEKS FOR POWDERCOATED INTERCOOLERS TO BE PROCESSED AND SHIPPED.
Designed specifically for the 3rd Gen Acura RDX chassis!
Fits 2019-2020 Acura RDX 2.0T
Fits 2021+ RDX 2.0T with Minor Modification
REQUIRES INTERCOOLER INSTALL KIT
Fits all variant models including 10AT, 6MT, RHD, International Models, Etc.
Overview
Important Notes:
- NO ECU CALIBRATION REQUIRED
- Intercooler Torque Spec: 18 ft/lb
Technical Notes:
It�s no secret that Honda�s newer turbo platforms are extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs. The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 25.5 x 3.0 x 9.75" 550+ horsepower rated bar-and-plate core. Our intercooler core which increases internal flow by 83% to allow optimal cooling and airflow. This intercooler utilizes factory mounting spots with cast aluminum end tanks as well as all factory air ducts/shrouds. To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install.
Performance Gains:
- Mid-range & top-end power gains
- Major drop in post charge air temperature at peak
- Increased efficiency & consistency in power delivery
- Increased engine safety
Kit Includes:
- (1) Intercooler Assembly
- (1) Cardboard Stencil w/ �PRL� Logo
- (1) Buna O-Ring
- (1) 304 Stainless Worm Clamp